Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 269)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 253
Background
Background color
Selection of the background color for the control chart.
Selection Color selection | white
Default value white
Measured values
Shape
Selection of the symbol for the display of the measured values.
Selection Symbol selection | •
Default value •
Color
Selection of the color for the measuring point symbol.
Selection Color selection | blue
Default value blue
Link measured values
on | off (Default value: off)
If this check box is activated, then the measured value points will be
joined by a line.
4.4.2.2.3 Control chart template - Limit values
Dialog window: Database ▶ Tools ▶ Templates ▶ Control chart templates... ▶ Con-
trol chart templates ▶ [Properties] ▶ Properties - Control chart - 'Name'
Definition of warning and intervention limits to be shown on the control
chart.
Warning limits
Warning limits are always in orange on the control chart.
Lower limit
Lower warning limit.
Input 10 digits
Range -1.0E8 ... 1.0E8 (max. 10 digits)
Upper limit
Upper warning limit.
Input 10 digits
Range -1.0E8 ... 1.0E8 (max. 10 digits)