2 analog output – Metrohm tiamo 2.3 Patch 1 (process analysis) User Manual
Page 1707
Advertising
■■■■■■■■■■■■■■■■■■■■■■
8 Manual control
tiamo 2.3 Patch 1 (for Process Analysis)
■■■■■■■■
1691
8.4.6.5.2
Analog output
Program part: Manual control
If in the device tree a single analog output is selected, then the output can
be controlled on the tabs Set value and Set default in the subwindow
for functions/parameters.
In the subwindow for the graphical display, the adjacent value of the ana-
log output is displayed.
Setting a value
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Mapping
Display of the mapped value range.
Value
Entry of the value to be set on the analog output.
Current value
Display of the adjacent value.
Advertising