Festo Контроллер позиционирования CPX-CMAX User Manual
Page 216
5. Parameter
5−28
Festo P.BE−CPX−CMAX−CONTROL−EN en 0908NH
Manufacturer device name
PNU
PNU: 120
Index: 1 ... 30
Max index: 30
Class: Array
Data type: char
Values
Default:
CPX−CMAX−C1−1
Impermissible characters:
−
CMAX designation (type). Unused characters are filled with zero (=00h=’0’).
ý
The parameter value cannot be changed.
o
Writing permissible only in commissioning/parametrising mode with disabled controller.
o
This parameter can be written by FCT without higher−order controller.
o
After writing, controller recalculation is carried out.
User device name
PNU
PNU: 121
Index: 1 ... 30
Max index: 30
Class: Array
Data type: char
Values
Default:
CMAX0001
Impermissible characters:
? @ . , ! : " § | $ % & / # ‘ ’ + ~ * ’ ;
° ^ < >
CMAX designation defined by the user. The name serves the identification by FCT and is checked by
the FCT when the connection to the device is established.
Example: CMAX1_Slot3". Unused characters are filled with zero (=00h=’0’).
The CMAX also contains an axis name (PNU 180 ff ) along with the device name.
o
The parameter value cannot be changed.
o
Writing permissible only in commissioning/parametrising mode with disabled controller.
ý
This parameter can be written by FCT without higher−order controller.
o
After writing, controller recalculation is carried out.
Drive manufacturer
PNU
PNU: 122
Index: 1 ... 30
Max index: 30
Class: Array
Data type: char
Values
Default:
Festo AG & Co. KG
Impermissible characters:
−
Controller manufacturer’s name Unused characters are filled with zero (=00h=’0’).
ý
The parameter value cannot be changed.
o
Writing permissible only in commissioning/parametrising mode with disabled controller.
o
This parameter can be written by FCT without higher−order controller.
o
After writing, controller recalculation is carried out.