Festo Контроллер позиционирования CPX-CMAX User Manual
Page 288
5. Parameter
5−100
Festo P.BE−CPX−CMAX−CONTROL−EN en 0908NH
Commissioning function
valve and sensor status
PNU
PNU: 1192
Index: 8
Max index: 8
Class: Struct
Data type: int32
Values
Without unit
Default: 0
Minimum: 0
Maximum: 0
Internal parameter.
ý
The parameter value cannot be changed.
o
Writing permissible only in commissioning/parametrising mode with disabled controller.
o
This parameter can be written by FCT without higher−order controller.
o
After writing, controller recalculation is carried out.
System of measurement units
PNU
PNU: 1193
Index: 1 ...12
Max index: 12
Class: Struct
Data type: int32
Values
Without unit
Default: 0
Minimum: −
Maximum: −
Determines the physical units, see section B.1.
ý
The parameter value cannot be changed.
o
Writing permissible only in commissioning/parametrising mode with disabled controller.
o
This parameter can be written by FCT without higher−order controller.
o
After writing, controller recalculation is carried out.
System of measurement for resolution
PNU
PNU: 1194
Index: 1 ... 12
Max index: 12
Class: Struct
Data type: int32
Values
Without unit
Default: 0
Minimum: −
Maximum: −
Determines the scaling/resolution or number of decimal places, see section B.1.
ý
The parameter value cannot be changed.
o
Writing permissible only in commissioning/parametrising mode with disabled controller.
o
This parameter can be written by FCT without higher−order controller.
o
After writing, controller recalculation is carried out.