Scatter-gather dma controller core, Core overview, Example systems – Altera Embedded Peripherals IP User Manual

Page 192: Scatter-gather dma controller core -1, Core overview -1, Example systems -1

Advertising
background image

Scatter-Gather DMA Controller Core

21

2014.24.07

UG-01085

Subscribe

Send Feedback

Core Overview

The Scatter-Gather Direct Memory Access (SG-DMA) controller core implements high-speed data

transfer between two components. You can use the SG-DMA controller core to transfer data from:
• Memory to memory

• Data stream to memory

• Memory to data stream

The SG-DMA controller core transfers and merges non-contiguous memory to a continuous address

space, and vice versa. The core reads a series of descriptors that specify the data to be transferred.
For applications requiring more than one DMA channel, multiple instantiations of the core can

provide the required throughput. Each SG-DMA controller has its own series of descriptors specifying

the data transfers. A single software module controls all of the DMA channels.
For the Nios

®

II processor, device drivers are provided in the Hardware Abstraction Layer (HAL)

system library, allowing software to access the core using the provided driver.

Example Systems

The block diagram below shows a SG-DMA controller core for the DMA subsystem of a printed circuit

board. The SG-DMA core in the FPGA reads streaming data from an internal streaming component and

writes data to an external memory. A Nios II processor provides overall system control.

©

2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134

Advertising