Interval timer core, Core overview, Functional description – Altera Embedded Peripherals IP User Manual

Page 249: Interval timer core -1, Core overview -1, Functional description -1, The interval timer core with avalon, Figure 25-1: interval timer core block diagram

Advertising
background image

Interval Timer Core

25

2014.24.07

UG-01085

Subscribe

Send Feedback

Core Overview

The Interval Timer core with Avalon

®

interface is an interval timer for Avalon-based processor systems,

such as a Nios

®

II processor system. The core provides the following features:

• 32-bit and 64-bit counters.

• Controls to start, stop, and reset the timer.

• Two count modes: count down once and continuous count-down.

• Count-down period register.

• Option to enable or disable the interrupt request (IRQ) when timer reaches zero.

• Optional watchdog timer feature that resets the system if timer ever reaches zero.

• Optional periodic pulse generator feature that outputs a pulse when timer reaches zero.

• Compatible with 32-bit and 16-bit processors.

Device drivers are provided in the HAL system library for the Nios II processor.

Functional Description

Figure 25-1: Interval Timer Core Block Diagram

Register File

status

control

period_

n

snap_

n

IRQ

Address &

Data

Avalon-MM

slave interface

to on-chip

logic

Control

Logic

resetrequest

(watchdog)

timeout_pulse

Counter

©

2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134

Advertising