Pll cores, Core overview, Pll cores -1 – Altera Embedded Peripherals IP User Manual

Page 312: Core overview -1

Advertising
background image

PLL Cores

32

2014.24.07

UG-01085

Subscribe

Send Feedback

Core Overview

The PLL cores, Avalon ALTPLL and PLL, provide a means of accessing the dedicated on-chip PLL

circuitry in the Altera

®

Stratix

®

, except Stratix V, and Cyclone

®

series FPGAs. Both cores are a component

wrapper around the Altera ALTPLL megafunction.
The PLL core is scheduled for product obsolescence and discontinued support. Therefore, Altera

recommends that you use the Avalon ALTPLL core in your designs.
The core takes an SOPC Builder system clock as its input and generates PLL output clocks locked to that

reference clock.
The PLL cores support the following features:
• All PLL features provided by Altera's ALTPLL megafunction. The exact feature set depends on the

device family.

• Access to status and control signals via Avalon Memory-Mapped (Avalon-MM) registers or top-level

signals on the SOPC Builder system module.

• Dynamic phase reconfiguration in Stratix III and Stratix IV device families.

The PLL output clocks are made available in two ways:

• As sources to system-wide clocks in your SOPC Builder system.

• As output signals on your SOPC Builder system module.

For details about the ALTPLL megafunction, refer to the

ALTPLL Megafunction User Guide

.

©

2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134

Advertising