Westermo RedFox Series - Manual (Page 131)

Westermo OS Management Guide
Version 4.17.0-0
Continued from previous page
Command Default Section
[no] ssh Enabled Section 7.3.48
[no] telnet Disabled Section 7.3.49
[no] snmp-server Enabled Section 6.3.1
Other maintenance commands
date [[YYYY-MM-DD ]hh:mm[:ss]]
Section 20.2.7
[no] timezone <TIMEZONE> Section 20.2.5
show timezone [QUERY|SUBSTRING] Section 20.2.8
show env Section 7.3.50
show uptime Section 7.3.51
show memory Section 7.3.52
show processes Section 7.3.53
show flash-table Section 7.3.54
show partitions Section 7.3.55
flash-table-update Section 7.3.56
7.3.1 Upgrading firmware
Syntax upgrade <pri|sec|boot> <IPADDR> <FILENAME>
upgrade <pri|sec|boot> URI://<ADDRESS>/PATH/<FILENAME>
Context Admin Exec
Usage Upgrade primary, secondary, or bootloader firmware via FTP, TFTP or USB
stick. In the first form, upgrade attempts to download and install FILENAME
via FTP from a server at IPADDR. If no FTP server is available, the command
tries to download the file using TFTP instead.
Note
If you use TFTP for upgrading with ”pkg” files, make sure your TFTP
server supports large files as defined in RFC2347[
22 ].
The second form uses a URI based format. The same format used in the
copy command, not all URIs are supported though, only ftp://, tftp:// and
➞ 2015 Westermo Teleindustri AB 131