Westermo RedFox Series - Manual (Page 644)

Westermo OS Management Guide
Version 4.17.0-0
Default values Disabled (”no redistribute”)
28.3.9 Configure Admin Distance for RIP
Syntax [no] distance <1-255>
Context Router RIP Configuration context
Usage Configure admin distance for all routes learnt via RIP. If the same route
is learnt via different routing protocols (or as connected or static route), the
route associated with the lowest admin distance will be used. For RIP the
admin distance defaults to 120. See also
sections 19.2.6 and 26.1.3 .
Use ”no distance” to reset the RIP admin distance to its default value.
Use ”show distance” to show the configured RIP admin distance value.
Default values 120
28.3.10 Manage Interface Specific RIP Settings
Syntax [no] rip
Context Interface Configuration context
Usage Enter the Interface RIP configuration context, i.e., the context where In-
terface specific RIP settings are configured.
Use ”no rip” to remove any specific RIP settings for this interface.
Use ”show rip” to show a summary of RIP settings for this interface.
Default values Disabled (i.e., no interface specific RIP settings)
28.3.11 Configure Interface RIP Passive Settings
Syntax [no] passive [auto]
Context Interface RIP Configuration context
Usage Control whether a specific interface should be passive (”passive”), ac-
tive (”no passive”), or to automatically follow (”passive auto”) the global
644 ➞ 2015 Westermo Teleindustri AB