Westermo RedFox Series - Manual (Page 831)

Westermo OS Management Guide
Version 4.17.0-0
Use ”show remote-subnet” to show the configured remote subnet for this
tunnel. ”None” is shown if no remote subnet has been configured.
Default values None (”no remote-subnet”)
35.3.21 Configure Local IP Protocol and UDP/TCP port
Syntax [no] local-protocol <PROTOCOL> [port <PORT>]
Context IPsec Configuration context
Usage Allowed transmitted IP protocol, and (TCP/UDP) port over this connection.
This setting must match in both ends of the tunnel for the tunnel to start.
”PROTOCOL” is IP protocol specified as a number (0-255), or by name. If pro-
tocol is TCP(6) or UDP(17), the traffic can further match specific (TCP/UDP)
port number for transmitted packets (”port <PORT>”).
If ”no local-protocol” is specified, all IP protocols are allow.
Use ”show local-protocol” to show the local IP protocol and UDP/TCP port
settings for this tunnel.
Default values Disabled (”no local-protocol”), i.e., all local IP protocols al-
lowed.
35.3.22 Configure Remote IP Protocol and UDP/TCP port
Syntax [no] remote-protocol <PROTOCOL> [port <PORT>]
Context IPsec Configuration context
Usage Allowed received IP protocol, and (TCP/UDP) port over this connection.
This setting must match in both ends of the tunnel for the tunnel to start.
”PROTOCOL” is IP protocol specified as a number (0-255) or by name. If pro-
tocol is TCP(6) or UDP(17), the traffic can further match specific (TCP/UDP)
port number for received packets (”port <PORT>”).
If ”no remote-protocol” is specified, all IP protocols are allow.
Use ”show remote-protocol” to show the remote IP protocol and UDP/TCP
port settings for this tunnel.
Default values Disabled (”no remote-protocol”), i.e., all local IP protocols al-
lowed.
➞ 2015 Westermo Teleindustri AB 831