Westermo RedFox Series - Manual (Page 48)

Westermo OS Management Guide
Version 4.17.0-0
Serial settings.
Hint
In this example, the switch is accessible via the logical port ”COM3”, but
the USB/serial adapter may be mapped to a different COM port on your PC.
Please check ”Ports (COM and LPT)” in the Windows ”Device Manager” to
get information on what COM port to specify.
When the appropriate serial settings have been configured, select the ”Session”
view. Select Serial as Connection type as shown in the figure below.
To start the serial connection, press the Open button. The figure below shows
the console prompt when logging in to the CLI via the console on a unit named
example.
48 ➞ 2015 Westermo Teleindustri AB