Westermo RedFox Series - Manual (Page 361)

Westermo OS Management Guide
Version 4.17.0-0
16.3.9 Path Cost Setting
Syntax [no] path-cost <0-20000000>
Context Spanning Tree Port Configuration context
Usage Configure the spanning tree path cost for a port. A low speed link should
get a higher cost, a high speed link a lower cost. Use ”path-cost 0” (or
”no path-cost”) to have the path-cost assigned automatically depending
on the port speed (see
section 16.1.3 ).
Values in range 1-20000000 means a statically configured path cost of the
given value.
Use ”show path-cost” to view the path cost setting for this port.
Default values Automatic (”path-cost 0”)
16.3.10 Show RSTP Status
Syntax show spanning-tree
Context Admin Exec context.
Usage Show spanning-tree status information, including current port states, root
bridge ID, etc..
Default values Not applicable.
➞ 2015 Westermo Teleindustri AB 361