Westermo RedFox Series - Manual (Page 135)

Westermo OS Management Guide
Version 4.17.0-0
Example
example:/#> boot
example:/boot/#> show boot-order
flash
example:/boot/#> boot-order bootp
example:/boot/#> show boot-order
bootp, flash
example:/boot/#> end
example:/#>
7.3.5 Manage BOOTP Bootstrap Settings
Syntax [no] bootp
Context System Bootstrap context
Usage Enter System Bootstrap BOOTP context to configure settings for BOOTP
boot services.
”no bootp” will reset the BOOTP bootstrap settings to default.
Use ”show bootp” to list BOOTP bootstrap settings (also available as ”show”
command within the
System Bootstrap BOOTP context.
Default values N/A
7.3.6 BOOTP timeout
Syntax [no] timeout <0-1800>
Context System Bootstrap BOOTP context
Usage Set timeout in seconds to wait for BOOTP server response.
If no BOOTP response is received from the BOOTP/DHCP server, new BOOTP
Requests will be re-transmitted up to the given timeout interval.
To avoid congestion, the Requests are re-transmitted randomised around
an exponential back-off interval; the back-off interval is doubled for each
request up to 60 seconds.
The BOOTP client will wait one extra back-off interval after the last transmit-
ted request, thus the actual timeout can be roughly 60 seconds longer than
configured.
➞ 2015 Westermo Teleindustri AB 135