Westermo RedFox Series - Manual (Page 674)

Westermo OS Management Guide
Version 4.17.0-0
30.3 Managing VRRP via the CLI
The VRRP CLI syntax has been changed from an approach where VRRP was con-
figured per (VLAN) interface to an approach where VRRP instances are config-
ured as a common router service. Entering the configuration via both meth-
ods has been supported since WeOS v4.9.x. When storing the configuration,
WeOS v4.13.x uses the new (router service) style.
Command Default Section
Configure VRRP Settings
router
Sec. 26.3.1
[no] vrrp <INSTANCEID> Sec. 30.3.1
[no] iface <IFNAME> Sec. 30.3.2
[no] vrid <VRID> Sec. 30.3.3
[no] version <2|3> 2 Sec. 30.3.4
[no] address <ADDRESS> Sec. 30.3.5
[no] interval <INTERVAL> [ms] 1 Sec. 30.3.6
[no] priority <1..255> 100 Sec. 30.3.7
[no] preempt [delay <0..1000>] Disabled Sec. 30.3.8
[no] auth <plain> <SECRET> Disabled Sec. 30.3.9
[no] track trigger <ID> adjust <DELTA> Disabled Sec. 30.3.10
[no] sync <INSTANCEID> Diabled Sec. 30.3.11
[no] mroute-ctrl Disabled Sec. 30.3.12
View VRRP Status
show vrrp
Sec. 30.3.13
30.3.1 Create and Manage a VRRP Instance
Syntax [no] vrrp <INSTANCEID>
Context Router Protocol Configuration context
Usage Create, manage, or delete a VRRP instance. Use ”vrrp <INSTANCEID>”
to enter the VRRP Instance Configuration context of the specified VRRP in-
674 ➞ 2015 Westermo Teleindustri AB