Westermo RedFox Series - Manual (Page 925)

Westermo OS Management Guide
Version 4.17.0-0
Default values 1 (i.e., running ”atcmd” will enter/create AT command set 1.
However, running ”no atcmd” will remove all configured AT command sets.)
Error messages None defined yet.
39.3.32 Auto-Answer
Syntax [no] auto-answer <COUNT>
Context atcmd context
Usage Set auto-answer, answer after number of rings. Use command ”auto-answer
0” for no auto-answer.
Use command ”no auto-answer” to reset to the default setting.
Default values 1
Error messages None defined yet.
39.3.33 Echo
Syntax [no] echo
Context atcmd context
Usage Enables/disables echo (ATE overrides this)
Default values Enabled
Error messages None defined yet.
39.3.34 Verbose
Syntax [no] verbose
Context atcmd context
Usage Enables/disables verbose result messages (ATV overrides this). When
disabled only the numeric codes for (the below) messages are displayed.
Default values Enabled
Error messages None defined yet.
➞ 2015 Westermo Teleindustri AB 925