Westermo RedFox Series - Manual (Page 302)

Westermo OS Management Guide
Version 4.17.0-0
13.4.15 IEEE 802.1X authentication
Syntax [no] dot1x-auth <ID>
Context VLAN Configuration context.
Usage Specify the IEEE 802.1X configuration to be used for this VLAN. Setting
this enables port-based access control for all ports untagged in this VLAN,
except for the ports defined with ”except-auth” (see
section 13.4.17 ). The
ID value references the 802.1X configuration. This configuration is managed
in the AAA subsystem, see
chapter 21 . Use ”no dot1x-auth” to disable
IEEE 802.1X authentication for this VLAN.
Use ”show dot1x-auth” to view the IEEE 802.1X authentication setting for
this VLAN.
Default values Disabled, i.e. IEEE 802.1X is not used.
13.4.16 MAC based authentication
Syntax [no] mac-auth <ID>
Context VLAN Configuration context.
Usage Specify the MAC authentication configuration to be used for this VLAN.
Setting this enables port-based access control for all ports untagged in this
VLAN, except for the ports defined with ”except-auth” (see
section 13.4.17 ).
The ID value references the MAC authentication configuration. This con-
figuration is managed in the AAA subsystem, see
chapter 21 . Use ”no
mac-auth” to disable MAC based authentication for this VLAN.
Use ”show mac-auth” to view the MAC based authentication setting for this
VLAN.
Default values Disabled, i.e. MAC based authentication is not used.
13.4.17 Except ports from authentication
Syntax [no] except-auth <PORT|PORTLIST>
Context VLAN Configuration context.
302 ➞ 2015 Westermo Teleindustri AB