Westermo RedFox Series - Manual (Page 154)

Westermo OS Management Guide
Version 4.17.0-0
Usage Set the monitor destination port, i.e., the mirror port.
Use ”show destination” to show currently configured port monitoring des-
tination port.
Default values By default there is no destination port.
7.3.38 Set Monitored Ports
Syntax [no] source <PORTLIST> [ingress] [egress]
Context Port Monitoring context
Usage Add/delete/update monitor source port(s), i.e., the ports being monitored.
Use ”show source” to show current set of ports being monitored.
Default values By default there are no source ports. Commands apply both to
”ingress” and ”egress” if neither is specified.
7.3.39 Manage LLDP settings
Syntax [no] lldp
Context Global Configuration context.
Usage Enter LLDP Configuration context. Use ”no lldp” to disable lldp.
Use ”show lldp” to view the current configuration. Alternatively, you can
enter the
LLDP Configuration context and run ”show” (see example in sec-
tion 7.3.40 ).
Default values LLDP is enabled by default.
7.3.40 Enable/disable LLDP
Syntax [no] enable
Context LLDP Configuration context.
Usage Enable/disable LLDP. Use ”enable” to enable and ”no enable” to disable
LLDP on all LAN ports. (As of WeOS v4.17.0 ”no enable” will be stored as
”no lldp”, see
section 7.3.39 .)
154 ➞ 2015 Westermo Teleindustri AB