Westermo RedFox Series - Manual (Page 300)

Westermo OS Management Guide
Version 4.17.0-0
Use ”no tagged <PORTLIST>” to remove tagged ports from a VLAN. If re-
moval of a tagged port implies that the port is no longer associated with any
VLAN, that port will be configured to VLAN 1 untagged.
Use ”show tagged” to view ports associated tagged with this VLAN.
Default values Not applicable.
Error messages A notification message is given in case the addition of port as
tagged on one VLAN implies that the same port will be removed as untagged
on the same VLAN (a port cannot be associated both tagged and untagged
with the same VLAN).
A ”PORTLIST” is a comma separated list of port ranges without intermediate
spaces, e.g., ”1/1-1/3,2/3”.
13.4.11 Manage forbidden ports
Syntax [no] forbid <PORT|PORTLIST>
Context VLAN Configuration context
Usage Prohibit that ports are dynamically added (AVT) to this VLAN ID, see also
sections 13.1.7 and 13.4.5 .
Use ”no forbid <PORTLIST>” to remove ports from the list of ports forbid-
den to be associated with this VLAN.
Use ”show forbidden” to view ports associated forbidden with this VLAN.
Default values Not applicable.
A ”PORTLIST” is a comma separated list of port ranges without intermediate
spaces, e.g., ”1/1-1/3,2/3”.
13.4.12 VLAN priority setting
Syntax [no] priority <0-7>
Context VLAN Configuration context.
Usage Set the (IEEE 802.1p) priority associated with this VLAN. Incoming pack-
ets associated with this VLAN will receive this priority.
300 ➞ 2015 Westermo Teleindustri AB