Sec. 33.3.10, Sec. 33.3.11, Sec. 33.3.12 – Westermo RedFox Series User Manual
Page 773
Westermo OS Management Guide
Version 4.17.0-0
Context Generic PPP setting (
and
contexts)
Usage Enable, or disable this PPP link.
Use ”show enable” to check if this PPP instance is enabled or not.
Default values Enabled
33.3.10
PPP Credentials (Username and Password)
Syntax [no] identity <USERNAME> password <PASSWORD>
Context Generic PPP setting (
and
contexts)
Usage PPP credentials, i.e., your username and password for the PPP connection.
This information is used to authenticate you to the peer end of the PPP
connection, typically your ISP.
(For information on how to authenticate your peer, see
Default values Disabled (”no identity”)
33.3.11
PPP Advanced Context
Syntax [no] ppp-advanced
Context Generic PPP setting (
and
contexts)
Usage Enter the PPP Advanced Configuration context. This contexts holds all PPP
settings applicable for this type of PPP context, while only the most common
settings are available in the generic
and
contexts) above. See
for more information.
33.3.12
PPP Local Address Setting
Syntax [no] address <ADDRESS>
Context Generic PPP setting (
and
contexts)
➞ 2015 Westermo Teleindustri AB
773