Westermo RedFox Series - Manual (Page 179)

Westermo OS Management Guide
Version 4.17.0-0
Continued from previous page
Speed/Duplex The speed duplex setting. Auto means speed and duplex
will be automatically negotiated. Otherwise the current
setting will be shown as speed in Megabit and duplex as
FDX for full duplex and HDX for half duplex. Note! This is
not the negotiated speed, it is the configuration setting!
Link Alarm
Enabled When link alarm is enabled an alarm will be generated if
port link is down. Alarms trigger an SNMP trap message
to be sent and alarms to be shown on the administra-
tion web. In the ports overview table a green check-mark
means enabled, and a dash means disabled.
Edit Click this icon to edit a port’s settings.
To change the settings for a specific port you will have to click the edit icon which
will take you to the port setting edit page see
section 8.2.2 .
8.2.2 Edit Port Settings
Menu path: Configuration ⇒ Port ⇒ Port ⇒
On this page you can change the settings for the port.
➞ 2015 Westermo Teleindustri AB 179