Westermo RedFox Series - Manual (Page 483)

Westermo OS Management Guide
Version 4.17.0-0
Usage Enable or disable an 802.1X authentication instance.
Use ”no enable” to disable.
Use ”show enable” to show whether this instance is enabled or disabled.
Default values Enabled.
21.3.18 Set IEEE 802.1X authentication instance description
Syntax [no] description <STRING>
Context 802.1X Configuration context
Usage Set or remove the description string for this 802.1X authentication in-
stance.
Use ”description <STRING>” to set a description or ”no description” to
remove the current description. Use citation marks around the string if you
want to have a description containing space characters.
Use ”show description” to show the configured instance description set-
ting.
Default values Empty.
Examples
Example
example:/config/aaa/dot1x-auth-0/#> description My_1X_net
or ...
example:/config/aaa/dot1x-auth-0/#> description ’’Employees only’’
21.3.19 Configure IEEE 802.1X authentication back-end servers
Syntax [no] method <group <GID>|server <ID>>
Context 802.1X Configuration context
Usage Set or remove the back-end method for the 802.1X authentication in-
stance.
➞ 2015 Westermo Teleindustri AB 483