Westermo RedFox Series - Manual (Page 772)

Westermo OS Management Guide
Version 4.17.0-0
❼ ”dial out”: Dial-out. WeOS will initiate outgoing calls.
❼ ”dial in out”: Combined dial-in/out. WeOS will be able to respond to
incoming calls and initiate outgoing calls.
Use ”show dial” to view the current dial mode.
Default values Null modem (”no dial”).
33.3.7 PPP Modem Initialisation String
Syntax [no] init-string <AT-CMD>
Context PPP Modem Configuration context
Usage AT command sequence used to initialise an external modem.
This option is only available when using an external modem, it is not appli-
cable in a null modem setup.
Use ”show init-string” to view the current initialisation string.
Default values ATE0Q0V1&C1&S0S0=0&W
33.3.8 PPP Modem Dial String
Syntax [no] dial-string <AT-CMD>
Context PPP Modem Configuration context
Usage AT command sequence used to make an outgoing call.
This option is only available when acting as an initiator, making outgoing
calls using an external modem. In other words when dial mode is one of
”dial out” or ”dial in out”.
Use ”show dial-string” to view the current dial string.
Default values ATD
33.3.9 PPP Enable
Syntax [no] enable
772 ➞ 2015 Westermo Teleindustri AB