Westermo RedFox Series - Manual (Page 530)

Westermo OS Management Guide
Version 4.17.0-0
Enter DHCP relay agent context.
Use ”no dhcp-relay” to remove an existing DHCP relay configuration.
Default values Not applicable.
23.3.2 Enable DHCP Relay Agent
Syntax [no] enable
Context DHCP Relay Configuration context
Usage Enable the DHCP Relay Agent.
Default values Enabled.
23.3.3 Listening Interfaces
Syntax [no] iface <IFACE>
Context DHCP Relay Configuration context
Usage Specify the interfaces that the relay agent will listen to.
Default values Not applicable.
23.3.4 DHCP Servers (IP addresses)
Syntax [no] server <ADDRESS>
Context DHCP Relay Configuration context
Usage Specify the DHCP server that the relay agent will forward requests to.
Default values Not applicable.
23.3.5 DHCP Server UDP port
Syntax [no] server-port <UDPPORT>
Context DHCP Relay Configuration context
530 ➞ 2015 Westermo Teleindustri AB