Westermo RedFox Series - Manual (Page 145)

Westermo OS Management Guide
Version 4.17.0-0
❼ Special configuration files: ”console”, ”running-config”, ”startup-config”,
and ”factory-config”.
❼ Log files: ”log://<FILENAME>”
❼ USB memory: ”usb://[DIRECTORY/]<FILENAME>”
Remote file access methods:
❼ TFTP: ”tftp://location[/directory]/filename”
❼ FTP: ”ftp://[username[:password]@]location[:PORT]
[directory]/filename”
If no username is provided, anonymous ftp login will be used. Default
password is ”guest@default”.
❼ SCP: ”scp://[username@]location[:PORT][/directory]
/filename”
By default username ”admin” will be used.
❼ HTTP: ”http://location[:PORT][/directory]/filename”
Context Admin Exec
Usage Copy files, save config, transfer to/from network locations. Copy local-
to-local, local-to-network and network-to-network. Special files are console,
running-config, startup-config and factory-config.
The variant ”copy <FROM> startup-config”, where ”FROM” is a file of the
form ”configN[.cfg]” or ”cfg://file.cfg”, changes which configuration
file is used as the startup-config. In effect only changing which file startup-
config points to. The contents of the previous file it pointed to remains
untouched.
This also means that you can not copy a file directly to startup-config from
any VFS. I.e., when copying a file from (T)FTP or USB you must first copy the
file to a configN[.cfg] file in the cfg:// VFS.
Please note, the use of the special file ”console” is very similar to the old
DOS style usage. Albeit limited to the usage: ”copy console <FILE>”.
When issuing this command you are presented with a paste area where
you can safely type in or paste parts of, or full, configuration files. However,
when pasting in partial ”.cfg” file snippets the system will use WeOS defaults
for unspecified settings.
Also, the destination file in ”copy console <FILE>” cannot be the console
➞ 2015 Westermo Teleindustri AB 145