Westermo RedFox Series - Manual (Page 250)

Westermo OS Management Guide
Version 4.17.0-0
11.3 Managing ADSL/VDSL ports via the CLI
The table below shows xDSL port management features available via the CLI.
Command Default Section
Configure ADSL and VDSL port settings
port [dsl|xdsl|. . . ] <PORTLIST>
Section 11.3.1
[no] mode <adsl [annex <a|b|i|j|l|m|l-m>] | adsl annex a Section 11.3.2
vdsl [annex <a|b|a-b>]>
[no] filter Enabled Section 11.3.3
ADSL specific port settings
mode adsl
[no] encap <llc|vcmux>
llc Section 11.3.4
[no] pvc <VPI/VCI> 8/35 Section 11.3.5
Port settings in common with Ethernet ports ( chapter 8 )
[no] enable Enabled Section 8.3.3
[no] priority <0-7> 0 Section 8.3.6
[no] priority-mode <tag|ip|port> tag Section 8.3.7
[no] link-alarm Disabled Section 8.3.8
[no] rate-limit <70-2560> Disabled Section 8.3.9
[no] traffic-shaping <70-2560> Disabled Section 8.3.10
[no] default-vid <VLAN_ID> Disabled Section 8.3.14
Show ADSL/VDSL related status and statistics
show dsl
Section 11.3.6
show ports Section 8.3.15
show rmon Section 9.3
11.3.1 Managing xDSL port settings
Syntax port [dsl|xdsl|...] <PORTLIST>
Context Global Configuration context
Usage Enter the xDSL Port Configuration context.
250 ➞ 2015 Westermo Teleindustri AB