Westermo RedFox Series - Manual (Page 828)

Westermo OS Management Guide
Version 4.17.0-0
Usage Set peer IP address, or DNS domain name. When acting as initiator, the
peer setting defines the remote server to connect to. As responder it can be
used to allow a single client or not.
Use ”no peer” to allow connections from any client.
Use ”show peer” to show the configured peer IP address or peer domain
name. ”Any” is shown if the peer can connect from any IP address.
Default values Any
35.3.16 Configure Outbound Interface
Syntax [no] outbound <IFACE>
Context IPsec Configuration context
Usage Set the outbound interface of this tunnel.
Use ”no outbound” to automatically select the interface leading to the de-
fault gateway as outbound interface.
Use ”show outbound” to show the configured outbound interface for this
tunnel. ”Default Gateway” is shown if the interface leading to the default
gateway should be used as outbound interface.
See section 35.1.1 for more information on the outbound interface.
Default values Auto (”no outbound”)
35.3.17 Configure Local Identifier
Syntax [no] local-id <inet <IPADDR|DOMAIN> | name <DOMAIN|USER> |
email <USER@DOMAIN> | key <ID> | dn <DNSTRING>>
Context IPsec Configuration context
Usage Set the identifier (type and value) for the VPN gateway. The local-id is
used by the VPN gateway during the IKE handshake. Typically the ”name”
type with a simple ID text string (e.g., alice) can be used to identify the
VPN gateway.
For more details on available identification types and ID values, see sec-
tion 35.1.2 .
828 ➞ 2015 Westermo Teleindustri AB