MacDon M205 Operators Manual - Manual (Page 159)

OPERATOR’S STATION
3.18.13 Engine Error Codes
The cab display module (CDM) displays error codes when there is a fault with one of the several sensors that
monitor and control engine operation, to assist the Operator or Technician in locating a specific problem with engine
operation. Refer to
8 Engine Error Codes, page 435 .
3.18.14 Cab Display Module (CDM) and Windrower Control Module (WCM)
Fault Codes
The CDM displays fault codes when there is a fault with one of the sensors that monitor and control windrower
operation, to assist the Operator or Technician in locating a specific problem with the windrower. Refer to
9 Cab
Display Module (CDM) Error Codes, page 453 .
169887 143 Revision A