MacDon M205 Operators Manual - Manual (Page 193)

OPERATION
17. Remove the temporary lift pins (A) (should be loose in
lift arm) and place into storage holes on weight box.
Figure 4.55: Lift Arms
Converting from Transport Mode to Field Operation
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Stop engine and remove key from ignition.
2. Disconnect electrical harness at connector (B) from
windrower and store harness (A) on weight box.
Figure 4.56: Electrical Harness
3. Disconnect wiring connector (A) at front wheel.
Figure 4.57: Header Transport Wheel
169887 177 Revision A