Removing lift filter, Danger – MacDon M205 Operators Manual User Manual
Page 402
Removing Lift Filter
Change the lift filter at the same time that the hydraulic oil is changed (1500 hours or every 2 years).
IMPORTANT:
If the filter needs to be changed between oil changes, apply a vacuum to the supply tank to prevent the oil from
running out of the filter head when the filter is removed.
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Stop engine, and remove key.
2. Open the hood. Refer to
3. Locate the oil filter (A) below the hydraulic oil reservoir.
4. Place a container underneath the filter to catch any oil
that may leak.
5. Clean around head of the filter.
6. Unscrew the filter (A) with a filter wrench.
Figure 5.203: Hydraulic System
7. Remove gasket (C) from groove (B) in filter head (A).
Figure 5.204: Hydraulic System
169887
386
Revision A