MacDon M205 Operators Manual - Manual (Page 186)

OPERATION
Towing Header with Windrower
The windrower can be used to tow a MacDon draper header that has the slow speed transport option installed.
Ensure
the optional weight box or an approved header transporter is installed on the windrower to transfer
weight to the lift arms.
WARNING
• A windrower without a header or weight box must
NOT be used to tow headers due to reduced
traction and possible loss of control.
• For towed equipment without brakes, do NOT
exceed 20 mph (32 km/h).
Figure 4.36: Towing a Header
CAUTION
• To tow a header with an M205 Self-Propelled Windrower, the header must be equipped with the
appropriate equipment to comply with local regulations.
• Before towing, conduct a pre-trip inspection to verify signal lighting and safety equipment is installed
and functioning properly.
• Do NOT exceed the Combined Gross Vehicle Weight (CGVW) specified in table 4.1 Maximum Weight,
page 170 .
• To prevent damage and/or loss of control, ensure the machine and attached equipment are within the
following weight limits:
Table 4.1 Maximum Weight
lbs kg
Maximum GVW (includes
mounted implements)
21,500 9750
Maximum CGVW (includes
towed and mounted
implements) 23,100 10,480
MAXIMUM 18,750 8500 Weight (A)
on both
drive wheels
MINIMUM 10,070 4570
Maximum weight (B) on
both caster tires
6050 2750
Figure 4.37: Maximum Weight
Converting from Field to Transport Mode
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
169887 170 Revision A