2closing platforms (standard position), Closing platforms (standard position), 2 closing platforms (standard position) caution – MacDon M205 Operators Manual User Manual

Page 308

Advertising
background image

MAINTENANCE AND SERVICING

1. Push latch (A) and pull platform (B) toward walking

beam until it stops and latch engages in open position.

Figure 5.21: Platform Latch

5.5.2

Closing Platforms (Standard Position)

CAUTION

Do NOT stand on an unlocked side platform. It is unstable and may cause you to fall.

NOTE:
This procedure describes how to close the cab-forward
left platform (A): use the same procedure for the right
platform (B).

Figure 5.22: Platforms

169887

292

Revision A

Advertising