MacDon M205 Operators Manual User Manual

Page 46

Advertising
background image

DESCRIPTION

Term

Definition

NPT

National Pipe Thread: a style of fitting used for low pressure port openings. Threads
on NPT fittings are uniquely tapered for an interference fit

ORB

O-ring boss: a style of fitting commonly used in port opening on manifolds, pumps
and motors

ORFS

O-ring face seal: a style of fitting commonly used for connecting hoses and tubes.
This style of fitting is also commonly called ORS, which stands for O-ring seal

PTO

Power Take-Off

rpm

Revolutions per minute

R-Series header

MacDon rotary disc header

RoHS (Reduction of
Hazardous Substances)

A directive by the European Union to restrict the use of certain hazardous
substances (such as hexavalent chromium used in some yellow zinc platings)

SAE

Society Of Automotive Engineers

Screw

A headed and externally threaded fastener that threads into preformed threads or
forms its own thread in one of the mating parts

Self-Propelled (SP)
Windrower

Self-propelled machine consisting of a power unit with a header

Soft joint

A joint made with the use of a fastener where the joining materials are compressible
or experience relaxation over a period of time

spm

Strokes per minute

Tractor

Agricultural type tractor

Truck

A four-wheel highway/road vehicle weighing no less than 7500 lbs (3400 kg)

Tension

Axial load placed on a bolt or screw, usually measured in pounds (lb) or Newtons (N)

TFFT

Turns from finger tight

Torque

The product of a force X lever arm length, usually measured in foot-pounds (ft·lbf)
or Newton-meters (N·m)

Torque angle

A tightening procedure where the fitting is assembled to a precondition (finger
tight) and then the nut is turned further a number of degrees or a number of flats to
achieve its final position

Torque-tension

The relationship between the assembly torque applied to a piece of hardware and
the axial load it induces in the bolt or screw

UCA

Upper cross auger

Washer

A thin cylinder with a hole or slot located in the center and is to be used as a spacer,
load distribution element, or a locking mechanism

Windrower

Power unit of a self-propelled header

WCM

Windrower control module

169887

30

Revision A

Advertising