Flood lights: rear, Adjusting rear flood lights, Replacing bulb in rear flood light – MacDon M205 Operators Manual User Manual
Page 384: Danger

9. Connect lamp plug (A) to main harness connector (B).
Figure 5.169: HID Auxiliary Light Harness
Flood Lights: Rear
Adjusting Rear Flood Lights
The rear flood lights are best adjusted with the machine in the field (or equivalent) to suit Operator preference.
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Shut down engine, and remove key. Turn lights ON.
2. Loosen bolts (A) and (B).
3. Position light to desired position.
4. Tighten bolts (A) and (B).
Figure 5.170: Rear Flood Lights
Replacing Bulb in Rear Flood Light
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
169887
368
Revision A