MacDon M205 Operators Manual - Manual (Page 80)

OPERATOR’S STATION
3.15 Engine Controls and Gauges
The following engine controls and gauges are conveniently
located on the operator’s console.
A – Ignition Switch
• ACC: Fully counterclockwise
• OFF: All electrical systems OFF
• RUN: Clockwise
• START: Fully clockwise to crank engine: Release and
switch returns to RUN
• REMOVE KEY WHEN WINDROWER NOT IN USE.
KEY ALSO LOCKS DOORS
B – Engine Temperature Gauge indicates engine coolant
temperature
• Normal Running: 180°–225°F (82°–107°C)
• Warning Tone Over 230°F (110°C)
C – Fuel Gauge indicates fuel level in tank
• E: Empty
• F: Full
D – Throttle controls engine speed
• FULL: Push lever forward
• OPERATING: Refer to 4.3.6 Windrower Operation, page
157
• CLOSED: Pull lever back
Figure 3.47: Engine Controls and Gauges
A - Ignition Switch B - Engine Temperature Gauge
C - Fuel Gauge D - Throttle
169887 64 Revision A