MacDon M205 Operators Manual - Manual (Page 63)

OPERATOR’S STATION
3.5 Seat Belts
The windrower is equipped with a seat belt on the operator’s and trainer’s seats.
WARNING
The seat belt can help ensure your safety if it is used and maintained.
• Before starting the engine, securely fasten your seat belt. Ensure that anyone occupying the trainee’s
seat is secured by a seat belt as well.
• Never wear a seat belt loosely or with slack in the belt system. Never wear the belt in a twisted condition
or pinched between the seat structural members.
To fasten seat belt:
1. Pull belt with metal eye (A) at right side completely
across your body.
2. Push the metal eye (A) into the buckle (B) until it locks.
3. Adjust the position of the belt as low on your body
as possible.
To release seat belt:
4. Push the red button (C) in the end of the buckle.
5. Separate the buckle (B) and metal eye (A).
Figure 3.14: Seat Belt
169887 47 Revision A