MacDon M205 Operators Manual - Manual (Page 68)

OPERATOR’S STATION
• Red lights (C) in hood
NOTE:
The hazard lights must be activated with the switch on
the cab display module (CDM) when driving on the road.
IMPORTANT:
Optional red tail lighting and marking kit must be installed
so that road travel in the cab-forward mode complies with
road travel regulations. See your MacDon Dealer.
Figure 3.25: Cab Forward: Rear View
3.7.4 Beacon Lighting (Optional)
MD #B5582
The beacon lights (A) are functional when the ignition and
the beacon switch (B) are ON.
The beacons MUST be used when driving on the road
where required by law.
Figure 3.26: Cab-Forward: Front View
Figure 3.27: Beacon Light Switch
169887 52 Revision A