Hid auxiliary lighting (optional - md #b5596), Adjusting hid auxiliary lights (if installed), Danger – MacDon M205 Operators Manual User Manual
Page 381
7. Match slots on new bulb (B) with lugs (D) in optical unit
and insert bulb into unit.
8. Secure bulb with wire retainer (A).
9. Push wire into connector (C).
Figure 5.161: Flood Light Assembly
10. Position light into light receptacle, ensuring top is up
and secure with bezel (C) and screws (B).
Figure 5.162: Forward Flood Light
HID Auxiliary Lighting (Optional - MD #B5596)
Two optional High Intensity Discharge (HID) lights provide additional lighting during field operation. They operate
only in cab-forward mode.
Adjusting HID Auxiliary Lights (if Installed)
If installed, HID auxiliary lights are best adjusted with the machine in the field (or equivalent) to suit
Operator preference.
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
169887
365
Revision A