MacDon M205 Operators Manual - Manual (Page 420)

MAINTENANCE AND SERVICING
3. Remove the eight wheel nuts (A) that secure the
axle (B) to the wheel (C).
4. Separate axle (B) and wheel (C).
Figure 5.232: Caster Wheel Assembly
Installing Forked Caster Wheel
1. Position wheel assembly (C) on axle assembly (B) and
install wheel nuts (A).
2. Torque wheel nuts (A), refer to Tightening Caster
Wheel Nuts, page 401 .
Figure 5.233: Caster Wheel Assembly
3. Position wheel assembly (D) in forked caster (E).
4. Position cover plates (C) and install eight bolts (A) (four
on each side of caster) to secure axle (B) to caster (E).
Torque bolts to 75–79 ft·lbf (97–107 N·m).
5. Lower caster wheel, refer to Lowering Caster Wheel
(Formed and Forked), page 403 .
Figure 5.234: Caster Wheel Assembly
169887 404 Revision A