MacDon M205 Operators Manual - Manual (Page 244)

OPERATION
CAUTION
Check to be sure all bystanders have cleared the area.
18. Start engine and activate HEADER DOWN switch (A)
on GSL to lower header fully. Stop engine and
remove key.
Figure 4.163: GSL
19. Connect header drive hoses (A) and electrical
harness (B) to header. Refer to the auger header
operator’s manual.
Figure 4.164: Header Drive Hoses and Harness
4.5.4 Detaching an A-Series Header
Refer to the following procedure to detach an A-Series header from the windrower:
• Detaching an A-Series Header: Hydraulic Center-Link, page 229
169887 228 Revision A