MacDon M205 Operators Manual - Manual (Page 331)

MAINTENANCE AND SERVICING
Turning Engine Manually
To manually turn the engine with the flywheel, an access hole is provided on the left cab-forward side for a
barring tool that is available from Cummins.
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Stop engine and remove ignition key.
2. Open the hood to the lowest position, refer to 5.4.1
Opening Hood (Lower Position), page 288 .
3. Open left cab-forward side platform. Refer to 5.5.1
Opening Platforms (Standard Position), page 291 .
4. Remove positive (red) cables (A) from battery posts
first, then remove negative (black) cables (B) from both
battery posts.
Figure 5.65: Battery Terminal Location
169887 315 Revision A