MacDon M205 Operators Manual - Manual (Page 395)

MAINTENANCE AND SERVICING
Checking and Replacing Fuses
1. To check fuse, pull fuse (A) out of receptacle and
visually examine.
2. To replace fuse, insert new fuse into receptacle.
IMPORTANT:
Replacement fuses should match rating on decal shown
on following page.
Figure 5.191: Fuses
Replacing Circuit Breakers and Relays
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
Replace breakers and relays as follows:
1. Stop engine and remove key.
2. Move right cab-forward side platform rearward
(cab-forward).
3. To replace circuit breaker (A), pull breaker out of
receptacle and install new circuit breaker.
4. To replace relay (B), pull relay out of receptacle and
install new relay.
5. Reinstall cover and secure with wing nut.
Figure 5.192: Relays and Breakers
169887 379 Revision A