MacDon M205 Operators Manual - Manual (Page 372)

MAINTENANCE AND SERVICING
3. The battery main disconnect switch (A) is located on
the right-hand frame rail beside the batteries. Ensure
battery switch (A) is switched to POWER OFF position.
Figure 5.140: Battery Switch
4. Remove the bolt (A) that secures the platform arm to
the platform. Swing arm (B) out of the way.
5. Remove the black plastic cover from the negative
cable clamps (D). Loosen clamps and remove cable
from batteries.
6. Remove the red plastic cover from positive cable
clamps (C). Loosen the clamps and remove cable
from batteries.
7. Remove bolts (E) securing strap (F) to frame, and
remove strap.
8. Lift batteries off holder (G).
NOTE:
Dual battery support can be removed from frame by
simply lifting support, and pulling it away from frame. Figure 5.141: Battery Location
Installing Batteries
Table 5.18 Battery Specification
Rating Group CCA (min) Volt Maximum Dimension
Heavy duty, off-road,
vibration resistant
BCI 29H or 31A 750 12
13.25 x 7.37 x 9.44 in.
(334 x 188 x 232 mm)
169887 356 Revision A