MacDon M205 Operators Manual - Manual (Page 228)

OPERATION
CAUTION
Check to be sure all bystanders have cleared the area.
17. Start engine and activate HEADER DOWN switch (A)
on GSL to lower header fully.
18. Stop engine and remove key.
Figure 4.122: GSL
19. Connect header drive hoses (A) and electrical
harness (B) to header. Refer to the draper header
operator’s manual.
Figure 4.123: Header Drive Hoses and Harness
20. Connect reel hydraulics (A) at right-hand side
of windrower. Refer to the draper header
operator’s manual.
Figure 4.124: Reel Hydraulics
4.5.2 Detaching a D-Series Header
Refer to the following procedure to detach a D-Series header from the windrower:
• Detaching a D-Series Header: Hydraulic Center-Link, page 213
169887 212 Revision A