Setting knife speed “on the go, Caution – MacDon M205 Operators Manual User Manual
Page 273
Advertising
![background image](/manuals/570509/273/background.png)
Setting Knife Speed “On the Go”
Figure 4.223: Operator Console
CAUTION
Check to be sure all bystanders have cleared the area.
Display and set knife speed “on the go” as follows:
1. Engage header.
2. Press PROGRAM (D) and SELECT (E) on cab display module (CDM) to show #### KNIFE SPM at (A).
Displayed value (####) = strokes per minute.
3. Press SLOWER (B) or FASTER (C) until desired knife speed is displayed at (A).
169887
257
Revision A
Advertising