MacDon M205 Operators Manual - Manual (Page 342)

MAINTENANCE AND SERVICING
1. Remove the primary filter, refer to Removing Primary
Air Filter, page 321 .
IMPORTANT:
When replacing secondary filter, reinsert new filter as soon
as possible to prevent dirt from entering engine intake.
2. Remove the secondary element (A), and pull it out of
the canister.
NOTE:
If replacing filter, refer to
Filter Part Numbers,
page 286 .
3. Insert new secondary filter element (A) into canister,
seal first, and push until seal is seated inside canister.
4. Reinstall the primary filter, refer to Installing Primary Air
Filter, page 323 .
Figure 5.86: Engine Air Cleaner
Fuel System
Removing and Installing Fuel Tank Vent Filter
The fuel tank is vented by a hose that is connected to the filler tube. The hose is connected to a filter that should
be changed every year.
Change the filter as follows:
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
WARNING
To avoid personal injury or death from explosion or fire, do NOT smoke or allow flame or sparks near
windrower when servicing.
1. Stop the engine and remove the key.
2. Open the hood, refer to 5.4.3 Opening Hood (Highest
Position), page 289 .
3. Open the right cab-forward side maintenance platform.
Refer to 5.5.1 Opening Platforms (Standard Position),
page 291 .
169887 326 Revision A