MacDon M205 Operators Manual - Manual (Page 301)

MAINTENANCE AND SERVICING
Lubricants, Fluids, and System Capacities
Table 5.15 System Capacities
Lubricant/Fluid Location Description Capacity
Grease
As required unless
otherwise specified
SAE Multi-Purpose.High Temperature
Extreme Pressure (EP2) Performance
With 1% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base
Diesel fuel Fuel tank
Diesel Grade No.2, or Diesel Grade No.1
and 2 mix
30 ; refer to Fuel Specifications,
page 284 for more information
97 U.S. Gallons (378
liters)
Hydraulic oil Hydraulic reservoir
SAE 15W-40 Compliant With SAE Specs
For API Class SJ and CH-4 Engine Oil 17.2 U.S. Gallons (66
liters)
Gear box 2.2 U.S. Quarts (2.1 liters)
Gear lubricant
Wheel drive 31
SAE 75W-90, API Service Class
GL-5.Fully Synthetic Gear Lubricant,
(SAE J2360 Preferred)
1.5 U.S. Quarts (1.4 liters)
Antifreeze
Engine cooling
system
ASTM D-4985, Ethylene Glycol with SCA
8.2 U.S. Gallons (31
liters)
32
Engine Oil Engine oil pan
SAE 15W-40 Compliant With SAE Specs
For API Class SJ and CH-4 Engine Oil 15.0 U.S. Quarts (14.2
liters)
Air conditioning
refrigerant Air conditioning
system
R134A 5 lb. (2.27 kg)
Air conditioning
refrigerant oil
33
Air conditioning
system total
capacity
PAG SP-15 8.1 fl. oz. (240 cc)
If Fleetguard ES Compleat ® is unavailable, use a coolant concentrate or prediluted coolant intended for use with
heavy duty diesel engines and with a minimum of the following chemical and physical properties:
• Is formulated with a quality nitrite free additive package.
• Provides cylinder cavitation protection according to fleet study run at or above 60% load capacity.
• Protects the cooling system metals (cast iron, aluminum alloys, and copper alloys such as brass) from corrosion.
The additive package must be part of one of the following coolant mixtures:
• Ethylene glycol or propylene glycol base prediluted (40–60%) heavy duty coolant.
• Ethylene glycol or propylene glycol base heavy duty coolant concentrate in a 40–60% mixture of concentrate with
quality water.
Water quality is important to the performance of the cooling system. Distilled, deionized, or demineralized water is
recommended for mixing with ethylene glycol and propylene glycol base engine coolant concentrate.
IMPORTANT:
Do NOT use cooling system sealing additives or antifreeze that contains sealing additives. Do NOT mix ethylene
glycol and propylene glycol base coolants. Do NOT use coolants that contain nitrites.
30. Optional when operating temperature is below 32°F.(0°C).
31. SAE 85W-140 API Service Class GL-5. Extreme Pressure Gear Lubricant is used before initial change.
32. Equal parts with water, high quality, soft, de-ionized or distilled water as recommended by supplier.
33. New compressor (MD #203013) comes filled. If installing on 2014 and prior, refer to Service Bulletin 1254.
169887 285 Revision A