MacDon M205 Operators Manual - Manual (Page 445)

7 Options and Attachments
7.1 Available Options and Attachments
The following options and attachments are available through your MacDon Dealer. The Dealer will require the part
number (MD #) to determine pricing and availability.
7.1.1 AM/FM Radio
The cab is pre-wired for easy installation of a DIN “E”-style audio component available from your MacDon Dealer.
Speakers are factory-installed.
For installation details, refer to the unloading and assembly instructions supplied with your windrower.
7.1.2 Automated Steering Systems
A MacDon-approved automated steering system is available from MacDon Dealers that provide installation and
support services.
MacDon windrowers are prewired for either the Trimble ® AutoPilot ™ hydraulically integrated steering system or the
Trimble EZ-Pilot ™ wheel/column based assisted steering system. The windrower’s ground speed lever (GSL) has
an automated steering (autosteer) engage switch and the Trimble ® display mounting kit MD #183348 is supplied in
the cab.
The Trimble ® AutoPilot ™ system requires the MacDon automated steering hydraulic interface kit MD #B5589.
Installation instruction MD #169539 is included with the kit.
Other GPS providers may supply parts in their vehicle specific installation packages or make installation kits available
through MacDon Dealers.
7.1.3 Booster Spring Kit (External)
Available for headers over 6000 lb (2724 kg) to increase the float capacity.
MD #B4659 - Booster Spring Kit (external) includes two springs (one for each side) and mounting bracket.
Instruction MD #169032 is included with the bundle.
7.1.4 Booster Spring Kit (Internal)
An additional spring that is installed inside the header lift spring for increased float capacity.
MD #B5303 - includes one spring and castings for one side of the windrower.
Instruction MD #169316 is included with the bundle.
7.1.5 Draper Header Case Drain Kit
The Draper Header Case Drain kit must be installed when attaching a MacDon D50, D60, or D65 draper header
with an upper cross auger (UCA), but without double draper drive. Case Drain Kit (MD #B5842) is NOT required for
double draper drive headers equipped with kits (MD #B5606) and (MD #B5653).
MD #B5842
169887 429 Revision A