MacDon M205 Operators Manual User Manual
Page 359
5. Remove wing nut (A) and open access door (B) at top
of cooling box.
NOTE:
Fins on coolers can be very easily bent which
may interfere with its function. Exercise caution
when cleaning.
Figure 5.119: Engine Cooling System
6. Clean radiator (D) through access holes in cooling box
with compressed air.
7. Clean oil cooler / air conditioning condenser (A),
charge air cooler (E), fuel cooler (B), and cooling
box (C) with compressed air.
8. Inspect all lines and coolers for evidence of leaks
and damage.
9. Slide oil cooler / air conditioning condenser (A) back
into cooling box (C).
10. Close side access door and lock with lever.
11. Close access door on top of the cooling box and secure
with wing nut.
12. Close cooler box screen, refer to
Figure 5.120: Engine Cooling System
169887
343
Revision A