MacDon M205 Operators Manual - Manual (Page 90)

OPERATOR’S STATION
3.18.2 Header Functions
Figure 3.63: Cab Display Module (CDM)
A - Display B - Select Switch C - Float Switch – Header Right Side
D - Float Switch – Header Left Side E - Auger/Draper Speed Adjust F - Header Index Switch
G - Return to Cut Switch
• DISPLAY: Header functions
• SELECT SWITCH: Allows Operator to select display item on lower line. Push to SELECT.
• FLOAT SWITCH – Header Right Side: Changes header float. The system remembers setting with deck shift
option if activated with float setting switch. Push + to Increase. Push – to Decrease.
• FLOAT SWITCH – Header Left Side: Changes header float. The system remembers setting with deck shift option
if activated with float setting switch. Push + to Increase. Push – to Decrease.
• AUGER/DRAPER SPEED ADJUST: Changes auger/draper speed INDEX with INDEX SWITCH ON. Changes
auger/draper SPEED with INDEX SWITCH OFF. Push upper switch to increase. Push lower switch to decrease.
• HEADER INDEX SWITCH: Links reel and conveyor speed to ground speed. Push-ON / Push-OFF.
NOTE:
Illuminates in ON position.
NOTE:
Header must be engaged.
• RETURN TO CUT HEIGHT SWITCH: Allows cutting height preset. Push-ON/Push-OFF.
NOTE:
Illuminates in ON position.
NOTE:
Header must be engaged.
169887 74 Revision A