MacDon M205 Operators Manual - Manual (Page 355)

MAINTENANCE AND SERVICING
3. Remove cap (A) from coolant recovery tank (B) and
add coolant until one-half full.
NOTE:
For coolant specifications, refer to
Lubricants,
Fluids, and System Capacities, page 285 .
4. Replace cap (A).
5. Close the platform. Refer to 5.5.2 Closing Platforms
(Standard Position), page 292 .
6. Close the hood, refer to 5.4.4 Closing Hood (Highest
Position), page 290 .
Figure 5.110: Engine Cooling System
Maintaining Engine Cooling Box
Refer to the following procedures:
• Opening Cooler Box Screen, page 339
• Charge Air Cooling, page 340
• Cleaning Screens and Coolers, page 340
• Cleaning Cooler Box Components, page 341
• Adjusting Screen Cleaner Duct to Screen Clearance, page 344
• Closing Cooler Box Screen, page 344
Opening Cooler Box Screen
1. Open the hood, refer to 5.4.3 Opening Hood (Highest
Position), page 289 .
2. Push latch (A) and open screen assembly access
door (B). Secure with rod stored inside screen door.
Figure 5.111: Engine Cooling System
169887 339 Revision A